Detailed Project Report on rcc hume pipes
- More than 40 years of experience
- Managed by expert industrial consultants
- ISO 9001-2015 Certified
- Registered under MSME, UAM No: DL01E0012000
- 24/5 Research Support
Get your quesries resolved from an industry expert. Ask your queries before report or book purchase. - Custom Research Service
Speak to the our consultant to design an exclusive study to serve your research needs. - Quality Assurance
All reports are prepared by highly qualified consultants & verified by a panel of experts. - Information Security
Your personal & confidential information is safe & secure.
RCC HUME PIPES
(CODE NO.4223)
RCC Hume pipes are made of a mixture of Portland cement, sand and aggregate in the proportion of 1:2:5:2.5 with steel rods and wires as reinforcement material. These pipes are manufactured in diameters ranging from 300 mm to 2200 mm or more. The RCC pipes are suitable for irrigation, culvert construction, sewerage and drainage purposes. Transportation of water, sewerage, effluents or other liquid slurries in these pipes is quite smooth. Seepage or leakage is totally avoided by proper jointing & sealing of two consecutive pieces of the pipe line. Hume pipes have reasonably good load-bearing capacity and hence, can be laid either underground or over the ground. Carefully made pipes, tested as per IS: 458-1971 is available in a wide range of sizes for use.
Well constructed steel wire/rod cage is concentrically placed inside the pipe mould where premixed concrete is charged for pipe casting. The rotating moulds receive the feed material through open ends at both ends.
RCC Hume pipes are used for sewer, road, highway, culvert, irrigation and water supply. Hume Pipe or Spun Pipes are available in 3 classes, normally NP2 and NP3 are manufactured using the HUME pipe manufacturing machines. But heavy duty pipes NP4 are produced using vertical manufacturing process, which is most advanced and computerized system.
Hume pipes manufacturing in India entirely depends on the construction market, which has been booming for last two decades due to enormous growth in construction, infrastructure and power sector in India.
RCC or Pre cast Pipe is the major civil engineering achievement. The HUME Pipe process for manufacturing the Reinforcement cement is a conventional system, where concrete is being poured manually after preparing the Reinforcement cage.
COST ESTIMATION
Plant Capacity 100 Mtrs./Day
Land & Building (4000 sq.mt.) Rs. 2.11 Cr
Plant & Machinery Rs. 41 Lacs
Working Capital for 2 Months Rs. 52 Lacs
Total Capital Investment Rs. 3.22 Cr
Rate of Return 41%
Break Even Point 52%
- INTRODUCTION
- USES AND APPLICATION
- HUME PIPE SPECIFICATION AND LAYING GUIDELINES
- CLASS
- DENSITY
- LENGTH
- DIAMETER OF RCC HUME PIPE
- JOINTS
- DESIGN
- HUME PIPE SELECTION AND LAYING GUIDELINES
- RCC HUME PIPES
- B.I.S. SPECIFICATION
- TECHNICAL SPECIFICATION OF PRE CAST CONCRETE PIPE
- SCOPE
- NOIES
- 2 REFERENCES
- 3 TERMONOLOGY
- CLASSIFICATION
- 5 MATERIALS
- 5.2 CEMENT
- NOTES
- 5.3 AGGREGATES
- 5.4 REINFORCEMENT
- 5.5 CONCRETE OR MORTAR
- 5.6 RUBBER RING
- 5.7 WATER
- 5.8 CHEMICAL ADMIXTURES
- 6.1 GENERAL
- 6.1.2.1 LONGITUDINAL REINFORCEMENT
- 6.2 REINFORCEMENT
- 6.3 ENDS OF PIPES
- NUTS
- 6.4 COVER
- 7 MANUFACTURES
- 7.1 GENERAL
- 7.2 CONCRETE MIXING AND PLACING
- 7.3 REINFORCEMENT CAGES
- 8 DIMENSIONS
- 8.1 PIPES
- DIFFERENT TYPES OF HUME PIPES
- REINFORCED CONCRETE CULVERT AND DRAINAGE PIPES:
- TESTING:
- 1 HP REINFORCED CONCRETE CULVERT
- REINFORCED CONCRETE CULVERT AND DRAINAGE PIPES
- REINFORCED CONCRETE PRESSURE PIPES
- GENERAL
- SPECIFICATIONS
- NOMINAL EFFECTIVE LENGTHS:
- RAW MATERIALS & THEIR TREATMENT
- AGGREGATES
- 1. COARSE AGGREGATES
- MANUFACTURED SAND
- LIGHTWEIGHT AGGREGATES
- ADMIXTURES
- WATER REDUCERS
- OPPORTUNITIES IN CONCRETE PIPE MANUFACTURE
- CONCRETE PIPE MARKET BY APPLICATION:
- CONCRETE PIPE MARKET BY PRODUCT:
- CONCRETE PIPE MARKET BY DIAMETER:
- CONCRETE PIPE MARKET BY PRESSURE RATING:
- CONSTRUCTION SCENARIO IN NEPAL
- CHALLENGES AND PROSPECTS OF CONSTRUCTION INDUSTRY IN NEPAL
- CHALLENGES AND PROBLEMS
- IMPACT OF COVID -19 ON CONSTRUCTION INDUSTRY IN NEPAL
- MANUFACTURING PROCESS OF RCC HUME PIPES
- CONCRETE PIPE AND ITS MANUFACTURE
- PRESTENSIONING CONCRETE
- 2. CASTING BEDS
- FORMING
- GRADES OF CONCRETE:-
- COMPRESSIVE STRENGTH MAINLY GOVERNS THE MIX DESIGN.
- UPTO M15 GRADES ARE LOW STRENGTH CONCRETE
- PROPERTIES
- PIPES OF LENGTHS 3 M & 4 M HAVE THE REINFORCEMENT AS BELOW:-
- A) LONGITUDINAL REINFORCEMENT:-
- B) CIRCUMFERENTIAL REINFORCEMENT:
- THE PITCH OF CIR. REINFORCEMENT SHOULD NOT BE MORE THAN:-
- ENDS OF PIPES
- TABLE 1 DESIGN AND STRENGTH TEST REQUIREMENTS OF CONCRETE
- PIPES OF CLASS NPI UNREINFORCED NON-PRESSURE PIPES
- TABLE 2 DESIGN AND STRENGTH TEST REQUIREMENTS OF CONCRETE
- PIPES OF CLASS NP2 REINFORCED CONCRETE, LIGHT-DUTY,
- NON-PRESSURE PIPES
- TABLES SPIGOT AND SOCKET DIMENSIONS OF NPI CLASS PIPES
- ALL DIMENSIONS IN MILLIMETERS
- VERY HIGH STRENGTH CONCRETE
- PROPERTIES
- CONCLUSIONS
- DIFFERENT TYPES OF CEMENT
- ORDINARY PORTLAND CEMENT (OPC)
- PORTLAND POZZOLANA CEMENT (PPC)
- PORTLAND SLAG CEMENT (PSC)
- HIGH-STRENGTH ORDINARY PORTLAND CEMENT (HSOPC)
- SULPHATE RESISTING CEMENT (SRC)
- RAPID-HARDENING PORTLAND CEMENT (RHPC)
- LOW-HEAT PORTLAND CEMENT (LHPC)
- WHITE PORTLAND CEMENT (WPC)
- HYDROPHOBIC PORTLAND CEMENT (HPC)
- OIL WELL CEMENT (OWC)
- REGULATED SET CEMENT (RSC)
- EXPANSIVE CEMENT (EC)
- SUPERSULPHATE CEMENT (SSC)
- MASONRY CEMENT (MC)
- HIGH ALUMINA CEMENT (HAC)
- ADMIXTURES FOR CONCRETE - AN OVERVIEW
- CLASSIFICATION
- COMPOSITION AND USAGE
- TABLE 1 TYPE, MODE OF ACTION, AND USE OF ADMIXTURES
- SOME DOS AND DON'TS
- SELECTION OF A WATER REDUCING ADMIXTURE
- CONCLUSION
- TABLE 2 PHYSICAL REQUIREMENTS OF ADMIXTURES
- H2O THE FOURTH INGREDIENT OF CONCRETE
- TESTS FOR QUALITY OF WATER
- THEY ENTAIL:
- EFFECTS OF IMPURITIES IN MIXING WATER ON CONCRETE
- SEA WATER
- ACIDIC WATERS
- ALKALINE WATERS
- INDUSTRIAL WASTE WATERS
- WATERS CARRYING SANITARY SEWAGE
- SUGAR
- OILS
- ALGAE
- PROCESSING DETAILS RCC HUME PIPE
- CONCRETE MIXING, FEEDING & CURING
- WORKING PRINCIPLE OF HUME PIPE MANUFACTURING
- RAW MATERIAL:
- ASSEMBLING OF MOULDS:
- MIXING OF CONCRETE:
- THE SPINNING OF MOULD:
- DEMOULDING:
- CURING:
- TEST & DISPATCH:
- INSTALLATION OF RCC HUME PIPES
- INSTALLATION OF PIPES
- TRENCH PREPARATION
- THE FOUNDATION
- BEDDING MATERIALS
- CONCRETE CRADLE BEDDING:
- (REINFORCED OR PLAIN CONCRETE)
- FIRST CLASS BEDDING:
- (GRANULAR MATERIAL)
- ORDINARY BEDDING:
- (NATURAL SOIL OF TRENCH)
- BEDDING PROCEDURE
- PROJECT IMPLEMENTATION SCHEDULES
- INTRODUCTION
- PROJECT HANDLING
- PROJECT SCHEDULING
- PROJECT CONSTRUCTION SCHEDULE
- TIME SCHEDULE
- PROCESS FLOW DIAGRAM
- COMPLETE PLANT AND MACHINERY SUPPLIERS FOR RCC HUME PIPES
- SUPPLIERS OF PLANTS & MACHINERY
- SUPPLIERS OF HUME PIPE MAKING MACHINERY
- SUPPLIERS OF CONCRETE MIXER
- SUPPLIERS OF WATER TANKS
- SUPPLIERS OF LATHE MACHINES
- SUPPLIERS OF DRILLING MACHINE
- SUPPLIERS OF GRINDERS
- SUPPLIERS OF MILLING MACHINE
- SUPPLIERS OF RAW MATERIALS
- CEMENT MANUFACTURERS
- SUPPLIERS OF RIVER SAND
- SUPPLIERS OF M.S. WIRE
APPENDIX – A:
01. PLANT ECONOMICS
02. LAND & BUILDING
03. PLANT AND MACHINERY
04. OTHER FIXED ASSESTS
05. FIXED CAPITAL
06. RAW MATERIAL
07. SALARY AND WAGES
08. UTILITIES AND OVERHEADS
09. TOTAL WORKING CAPITAL
10. TOTAL CAPITAL INVESTMENT
11. COST OF PRODUCTION
12. TURN OVER/ANNUM
13. BREAK EVEN POINT
14. RESOURCES FOR FINANCE
15. INSTALMENT PAYABLE IN 5 YEARS
16. DEPRECIATION CHART FOR 5 YEARS
17. PROFIT ANALYSIS FOR 5 YEARS
18. PROJECTED BALANCE SHEET FOR (5 YEARS)
How to Make Project Report?
Detailed Project Report (DPR) includes Present Market Position and Expected Future Demand, Technology, Manufacturing Process, Investment Opportunity, Plant Economics and Project Financials. comprehensive analysis from industry covering detailed reporting and evaluates the position of the industry by providing insights to the SWOT analysis of the industry.
Each report include Plant Capacity, requirement of Land & Building, Plant & Machinery, Flow Sheet Diagram, Raw Materials detail with suppliers list, Total Capital Investment along with detailed calculation on Rate of Return, Break-Even Analysis and Profitability Analysis. The report also provides a birds eye view of the global industry with details on projected market size and then progresses to evaluate the industry in detail.
We can prepare detailed project report on any industry as per your requirement.
We can also modify the project capacity and project cost as per your requirement. If you are planning to start a business, contact us today.
Detailed Project Report (DPR) gives you access to decisive data such as:
- Market growth drivers
- Factors limiting market growth
- Current market trends
- Market structure
- Key highlights
Overview of key market forces propelling and restraining market growth:
- Up-to-date analyses of market trends and technological improvements
- Pin-point analyses of market competition dynamics to offer you a competitive edge major competitors
- An array of graphics, BEP analysis of major industry segments
- Detailed analyses of industry trends
- A well-defined technological growth with an impact-analysis
- A clear understanding of the competitive landscape and key product segments
Need Customized Project Report?
- Ask for FREE project related details with our consultant/industry expert.
- Share your specific research requirements for customized project report.
- Request for due diligence and consumer centric studies.
- Still haven't found what you're looking for? Speak to our Custom Research Team
About Engineers India Research Institute:
Our Approach
- Our research reports comprehensively cover Indian markets (can be modified as per your country), present investigation, standpoint and gauge for a time of five years*.
- The market conjectures are produced on the premise of optional research and are cross-accepted through associations with the business players
- We use dependable wellsprings of data and databases. What's more, data from such sources is handled by us and incorporated into the report
Why buy EIRI reports?
- Our project reports include detailed analysis that help to get industry Present Market Position and Expected Future Demand.
- Offer real analysis driving variables for the business and most recent business sector patterns in the business
- This report comprehends the present status of the business by clarifying a complete SWOT examination and investigation of the interest supply circumstance
- Report gives investigation and top to bottom money related correlation of real players/competitors
- The report gives gauges of key parameters which foresees the business execution
