Detailed Project Report on aac & acsr aluminium conductors

AAC & ACSR ALUMINIUM CONDUCTORS
[CODE NO. 1809]


Aluminium Conductors (i) All Aluminium Conducts (AAC) (ii) All Alloy Aluminium Conductors (AAAC), and (iii) Aluminium Conductors Steel Reinforced (ACSR) are used in Transmission and Distribution system to carry the generated electrical energy from generating station to end user.

The Electrical energy is normally generated at the power stations far away from the urban areas where the consumers are located. There is a large network of conductors between the generating stations and the consumer.

The network is called the Transmission and Distribution system. The Transmission system is to deliver bulk power from power stations to the load centres and large industrial consumers beyond the economical service range of the regular primary distribution lines where as distribution system is to deliver power from power sector or substations to the various consumers. This transmission and distribution system can employ either overhead system or underground system.

Transmission of power, overhead system mainly due to low cost and some other advantages ACSR generally used or transmission line and AAC and AAAC conductors for distribution of power carry out mostly the high voltage transmission.

For transmission and distribution of electric power the conductor material used must have the following characteristics: ) High conducting i.e. low specific resistance


COST ESTIMATION

Plant Capacity                                       82.00 MT/day                                  .       
Land & Building (18000 Sq.Mtr)         Rs 17.68  Cr  
Plant & Machinery                                  Rs 10.93 Cr      
W.C. for 2 Months                                   Rs. 81.34 Cr
Total Capital Investment                        Rs 1.11 Arab          
Rate of Return                                       47%  
Break Even Point                                   30%


INTRODUCTION                                            
USES & APPLICATIONS                                    
PROPERTIES OF CONDUCTORS                            
B.I.S. SPECIFICATIONS                                    
MARKET POSITION                                        
PROJECTED ALUMINIUM USAGE TRENDS IN POWER
SECTOR DURING 2012-17                                    
QUALITY CONTROL OF ALUMINIUM CONDUCTORS                
MANUFACTURING PROCESS                                
PROCESS FLOW CHART FOR ACSR CONDUCTOR                
PROCESS FLOW SHEET FOR ALL ALUMINIUM ALLOY CONDUCTORS    
PLANT LAYOUT                                            
PRINCIPLES OF PLANT LAYOUT                                
PLANT LOCATION FACTORS                                
EXPLANATION OF TERMS USED IN THE PROJECT REPORT        
MANUFACTURERS/SUPPLIERS/EXPORTERS OF ALUMINIUM CONDUCTOR                    


  APPENDIX – A :

 .      COST OF PLANT ECONOMICS      
 2.      LAND & BUILDING                                      
 3.      PLANT AND MACHINERY                                  
 4.      FIXED CAPITAL INVESTMENT                             
 5.      RAW MATERIAL                                         
 6.      SALARY AND WAGES                                     
 7.      UTILITIES AND OVERHEADS                              
 8.      TOTAL WORKING CAPITAL                                
 9.      COST OF PRODUCTION                                   
10.      PROFITABILITY ANALYSIS                               
11.      BREAK EVEN POINT                                     
12.      RESOURCES OF FINANCE                           
13.      INTEREST CHART                                       
14.      DEPRECIATION CHART                                   
15.      CASH FLOW STATEMENT