Detailed Project Report on granite cutting & polishing unit

 GRANITE CUTTING AND POLISHING UNIT
[CODE NO.4330

Granite  is an important structural and ornamental stone  and  because of its high compressive strength and durability,     is  extensively  used  for  massive  structural  works   like     bridges,  piers,  sea  and river walls,  dams and  monumental     buildings,  where  excessive  wear and abrasion is likely  to     occur.   fine  grained  variety  of granite  that  takes  and   preserves  high polish and is susceptible of being carved  is     employed  for  ornamental and monumental works and  also  for     inscription purposes.   Granite is found in several parts  of     India  with  slight variations in the physical properties  of    the  stone  depending upon  the grain size and  the  minerals  that go into its formation.

Granite  is  available  in different colours  mostly  in     gray,  motted grey,  red,  pink,  dark,  blue, white or green     depending  upon  the  colours  desired  and  the  permissible     natural  variations  in colour and texture in  detail  or  by  naming  the  granite  having  the  required  characteristics.  

Granite  containing injurious mineral like pyridly and ause     objectionable strain on the stone shall be executed.

Abrasives  include a wide range of materials extensively used  in  almost  every  branch  of  industry  for   cutting,  drilling, grinding and polishing.  The materials employed are  required to be hard,  tough and sharp.  The following are the  principal  natural abrassives and the forms in which they are     used.

COST ESTIMATION

Plant capacity                                        16000.00 SQF/day
Land & Building (3000 Sq.Mtrs)        Rs. 73.20 Lacs
Plant & Machinery                                 Rs. 1.19 Cr
W.C. for 3 Months                                 Rs. 55.50 Lacs
Total Capital Investment                     Rs. 2.54 Cr
Rate of Return                                       20%
Break Even Point                                   61%

1.   INTRODUCTION                                      
2.   MARKET POSITION                                  
3.   INFORMATION ON LICENSCING AND TRADE IN CERAMIC  
     INDUSTRY SCOPE OF LICENSING UNDER THE ACT        
4.   PROCESS OF MANUFACTURE                           
5.   FLOW PROCESS FOR GLASS BOTTLES                   
6.   PROCESS FLOW SHEET DIAGRAM                        
7.   SUPPLIERS OF RAW MATERIALS                       
8.   SUPPLIERS OF PLANT AND MACHINERY                

APPENDIX – A :

 1.      COST OF PLANT ECONOMICS      
 2.      LAND & BUILDING                                      
 3.      PLANT AND MACHINERY                                  
 4.      FIXED CAPITAL INVESTMENT                             
 5.      RAW MATERIAL                                         
 6.      SALARY AND WAGES                                     
 7.      UTILITIES AND OVERHEADS                              
 8.      TOTAL WORKING CAPITAL                                
 9.      COST OF PRODUCTION                                   
10.      PROFITABILITY ANALYSIS                               
11.      BREAK EVEN POINT                                     
12.      RESOURCES OF FINANCE                           
13.      INTEREST CHART                                       
14.      DEPRECIATION CHART                                   
15.      CASH FLOW STATEMENT                                   
16.      PROJECTED BALANCE SHEET