07 Dec
0
05 Dec
0
Detailed Project Report on led bulb manufacturing unit
Detailed Project Report on led bulb manufacturing unit
₹ 0 INR
Why Choose Us
- More than 40 years of experience
- Managed by expert industrial consultants
- ISO 9001-2015 Certified
- Registered under MSME, UAM No: DL01E0012000
How we work
- 24/5 Research Support
Get your quesries resolved from an industry expert. Ask your queries before report or book purchase. - Custom Research Service
Speak to the our consultant to design an exclusive study to serve your research needs. - Quality Assurance
All reports are prepared by highly qualified consultants & verified by a panel of experts. - Information Security
Your personal & confidential information is safe & secure.
LED BULB MANUFACTURING UNIT
[CODE NO.4046]
A light emitting diode (LED) is a device which converts electrical energy to light energy. LEDs are preferred light sources for short distance (local area) optical fiber network because they: are inexpensive, robust and have long life (the long life of an LED is primarily due to its being a cold device, i.e. its operating temperature being much lower than that of, say, an incandescent lamp),can be modulated (i.e. switched on and off) at high speeds (this property of an LED is also due to its being a cold device as it does not have to overcome thermal inertia),couple enough output power over a small area to couple to fibers (though the output spectrum is wider than other sources such as laser diodes).
A light-emitting diode (LED) is a two-lead semiconductor light source. It is a p–n junction diode, which emits light when activated.[4] When a suitable voltage is applied to the leads, electrons are able to recombine with electron holes within the device, releasing energy in the form of photons. This effect is called electroluminescence, and the color of the light (corresponding to the energy of the photon) is determined by the energy band gap of the semiconductor.
Types of LED
(1) Miniature
Photo of miniature surface mount LEDs in most common sizes. They can be much smaller than a traditional 5 mm lamp type LED which is shown on the upper left corner.
Very small (1.6x1.6x0.35 mm) red, green, and blue surface mount miniature LED package with gold wire bonding details. These are mostly single-die LEDs used as indicators, and they come in various sizes from 2 mm to 8 mm, through-hole and surface mount packages. They usually do not use a separate heat sink.[116] Typical current ratings ranges from around 1 mA to above 20 mA. The small size sets a natural upper boundary on power consumption due to heat caused by the high current density and need for a heat sink. Package shapes include round, with a domed or flat top, rectangular with a flat top (as used in bar-graph displays), and triangular or square with a flat top. The encapsulation may also be cleor tinted to improve contrast and viewing angle. Researchers at the University of Washington have invented the thinnest LED. It is made of two-dimensional (2-D) flexible materials. It is 3 atoms thick, which is 10 to 20 times thinner than three-dimensional (3-D) LEDs and is also 10,000 times smaller than the thickness of a human hair. These 2-D LEDs are going to make it possible to create smaller, more energy-efficient lighting, optical communication and nano lasers.
There are three main categories of miniature single die LEDs:
• Low-current: typically rated for 2 mA at around 2 V (approximately 4 mW consumption).
• Standard: 20 mA LEDs (ranging from approximately 40 mW to 90 mW) at around:
• 1.9 to 2.1 V for red, orange and yellow,
• 3.0 to 3.4 V for green and blue,
• 2.9 to 4.2 V for violet, pink, purple and white.
• Ultra-high-output: 20 mA at approximately 2 V or 4–5 V, designed for viewing in direct sunlight.
5 V and 12 V LEDs are ordinary miniature LEDs that incorporate a suitable series resistor for direct connection to a 5 V or 12 V supply.
(2) Mid-range
Medium-power LEDs are often through-hole-mounted and mostly utilized when an output of just tens of lumens are needed. They sometimes have the diode mounted to four leads (two cathode leads, two anode leads) for better heat conduction and carry an integrated lens. An example of this is the Super flux package, from Philips Lumileds. These LEDs are most commonly used in light panels, emergency lighting, and automotive tail-lights. Due to the larger amount of metal in the LED, they are able to handle higher currents (around 100 mA). The higher current allows for the higher light output required for tail-lights and emergency lighting
(3) High-power
High-power light-emitting diodes attached to an LED star base (Luxeon, Lumileds)
See also: Solid-state lighting, LED lamp and Thermal management of high-power LEDs
High-power LEDs (HPLEDs) or high-output LEDs (HO-LEDs) can be driven at currents from hundreds of mA to more than an ampere, compared with the tens of mA for other LEDs. Some can emit over a thousand lumens. LED power densities up to 300 W/cm2 have been achieved.[120] Since overheating is destructive, the HPLEDs must be mounted on a heat sink to allow for heat dissipation. If the heat from a HPLED is not removed, the device will fail in seconds. One HPLED can often replace an incandescent bulb in a flashlight, or be set in an array to form a powerful LED lamp.
Some well-known HPLEDs in this category are the Nichia 19 series, Lumileds Rebel Led, Osram Opto Semiconductors Golden Dragon, and Cree X-lamp. As of September 2009, some HPLEDs manufactured by Cree now exceed 105 lm/W(e.g. the XLamp XP-G LED chip emitting Cool White light) and are being sold in lamps intended to replace incandescent, halogen, and even fluorescent lights, as LEDs grow more cost competitive.
Evidence of Haitz's law which predicts an exponential rise in light output and efficacy of LEDs over time. For example, the CREE XP-G series LED achieved 105 lm/W in 2009 while Nichia released the 19 series with a typical efficacy of 140 lm/W in 2010.
(4) AC driven LED
LEDs have been developed by Seoul Semiconductor that can operate on AC power without the need for a DC converter. For each half-cycle, part of the LED emits light and part is dark, and this is reversed during the next half-cycle. The efficacy of this type of HPLED is typically 40 lm/WA large number of LED elements in series may be able to operate directly from line voltage. In 2009, Seoul Semiconductor released a high DC voltage LED, named as 'Acrich MJT', capable of being driven from AC power with a simple controlling circuit. The low-power dissipation of these LEDs affords them more flexibility than the original AC LED design.
Advantages
• Efficiency: LEDs emit more lumens per watt than incandescent light bulbs. The efficiency of LED lighting fixtures is not affected by shape and size, unlike fluorescent light bulbs or tubes.
• Color: LEDs can emit light of an intended color without using any color filters as traditional lighting methods need. This is more efficient and can lower initial costs.
• Size: LEDs can be very small (smaller than 2 mm2) and are easily attached to printed circuit boards.
• On/Off time: LEDs light up very quickly. A typical red indicator LED will achieve full brightness in under a microsecond.[134] LEDs used in communications devices can have even faster response times.
• Cycling: LEDs are ideal for uses subject to frequent on-off cycling, unlike incandescent and fluorescent lamps that fail faster when cycled often, or high-intensity discharge lamps (HID lamps) that require a long time before restarting.
Dimming: LEDs can very easily be dimmed either by pulse-width modulation or lowering the forward current. This pulse-width modulation is why LED lights, particularly headlights on cars, when viewed on camera or by some people, appear to be flashing or flickering. This is a type of stroboscopic effect.
• Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
• Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt failure of incandescent bulbs.
• Lifetime: LEDs can have a relatively long useful life. One report estimates 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000 to 2,000 hours. Several DOE demonstrations have shown that reduced maintenance costs from this extended lifetime, rather than energy savings, is the primary factor in determining the payback period for an LED product.
• Shock resistance: LEDs, being solid-state components, are difficult to damage with external shock, unlike fluorescent and incandescent bulbs, which are fragile.
• Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner. For larger LED packages total internal reflection (TIR) lenses are often used to the same effect. However, when large quantities of light are needed many light sources are usually deployed, which are difficult to focus or collimate towards the same target.
COST ESTIMATION
Plant Capacity 60,000 Bulbs/Day
Land & Building (1500 sq.mt.) Rs. 2.31 Cr
Plant & Machinery Rs. 89 Lac
Working Capital for 1 Month Rs. 3.39 Cr
Total Capital Investment Rs. 6.76 Cr
Rate of Return 48%
Break Even Point 38%
INTRODUCTION
TYPES OF LED
(1) MINIATURE
THERE ARE THREE MAIN CATEGORIES OF MINIATURE SINGLE DIE LEDS:
(2) MID-RANGE
(3) HIGH-POWER
(4) AC DRIVEN LED
ADVANTAGES
DISADVANTAGES
TECHNOLOGY OVERVIEW OF LED BULB
LED LAMPS BULB
WHITE LIGHT LEDS
COLOR CHANGING LED LIGHTING
LED DRIVERS
THERMAL MANAGEMENT
EFFICIENCY DROOP
HOUSEHOLD LED LAMP
LAMP SIZES AND BASES
HOW LEDS PRODUCE LIGHT
WHITE LIGHT LED TECHNOLOGY FOR GENERAL ILLUMINATION
THE MANUFACTURING OF WHITE LIGHT LEDS
MANUFACTURING PHASES OF PACKAGED WHITE LIGHT LED ASSEMBLY
SUBSTRATE PRODUCTION
1. PREPARATION OF THE SEMI-CONDUCTOR WAFERS
2. ADDING EPITAXIAL LAYERS
LED DIE FABRICATION PROCESS
PACKAGING THE LED ASSEMBLY
FINISHED PACKAGED LED THE PHILIPS LUXEON REBEL: AN ILLUSTRATION
RAW MATERIALS
VARIOUS MATERIALS USED FOR MULTI-COLOUR LEDS
LED LAMP CHARACTERISTICS
TREND FOR LED RETROFIT LAMP CHARACTERISTICS IN INDIA
USES AND APPLICATION
USES
(1) POWER SOURCES
(2) ELECTRICAL POLARITY
(3) SAFETY AND HEALTH
APPLICATIONS
LED USES FALL INTO FOUR MAJOR CATEGORIES:
B.I.S. SPECIFICATIONS
MARKET OVERVIEW OF LED BULBS
INDIAN MARKET SIZE
MARKET GROWTH
THE MAJOR DEMAND-GENERATING APPLICATION AREAS ARE:
MARKET STUDY
GOVERNMENT FACILITATING WIDE SCALE IMPLEMENTATION
OF LED LIGHTING
CURRENT OPPORTUNITIES
DRAFT SPECIFICATIONS FOR LED SELF BALLASTED LAMPS
DRAFT SPECIFICATIONS FOR LED DOWNLIGHTERS
DRAFT SPECIFICATIONS FOR LED SECONDARY ROAD STREET LIGHTS
LED PROFESSIONAL PRODUCTS (LUMINAIRES)
LED REPLACEMENT AND RETROFIT LAMPS
THE PROMISE OF LEDS
CHARACTERISTICS OF LED RETROFIT LAMP SOLUTIONS
MANUFACTURERS/SUPPLIERS OF LED BULB
METHOD OF MANUFACTURING LED BULBS
MAUFACTURING PROCESS OF LED BULBS HOUSING
PROCESS FLOW DIAGRAM
PROCESS FLOW CHART
MANUFACTURING PROCESS IN DETAILS
(A) MANUFACTURING OF LED
SUBSTRATE MANUFACTURING
INORGANIC SEMICONDUCTOR MANUFACTURING
EPITAXIAL PROCESS
PHOSPHOR MANUFACTURING
LIGHT-EMITTING DIODE ASSEMBLY AND PACKAGING
LED MOUNTING ON PCB
1: THROUGH HOLE COMPONENT MOUNTING
2: SMD PICK AND PLACE MACHINE
3: SOLDER PROCESS
4: REFLOW SOLDERING PROCESS
5: REPAIR AND REWORK
LED BULB ASSEMBLY PROCESS
MANUFACTURING MACHINES
MACHINES FOR LED MANUFACTURING
MACHINES FOR LED ASSEMBLY
DRILL MACHINE: FOR VARIOUS DRILLING JOBS
TESTING EQUIPMENT FOR LED
ELECTRONIC COMPONENT TESTING EQUIPMENT
EQUIPMENT FOR ASSEMBLY
ENVIRONMENTAL ASSES REPORT ON LED TUBE AND BULB
FIGURE 4-1 LED PACKAGE
FIGURE 4-2. LED LAMP
LIFE CYCLE FLOWS AND PROCESSES
OVERVIEW
FIGURE 4-3. MATERIALS FLOW FOR LIGHT-EMITTING DIODE LAMP
RAW MATERIALS EXTRACTION AND PROCESSING
LED CHIP
CRYSTALS AND SUBSTRATES
TABLE MATERIALS BY COLOR PRODUCED
LED PACKAGE (HOUSING)
THE TYPICAL LED PACKAGE CONTAINS:
LED LAMP
MATERIALS INVENTORY FOR LED LAMP FROM THE OSRAM STUDY
LED PACKAGE (HOUSING)
LAMP
PLANT LAYOUT
SUPPLIERS OF PLANT AND MACHINERY
SUPPLIERS OF PLANT AND MACHINERY FOR LED TUBE
AND BULB [IMPORTED]
SUPPLIERS OF RAW MATERIAL FOR LED TUBE AND BULB
APPENDIX – A:
01. PLANT ECONOMICS
02. LAND & BUILDING
03. PLANT AND MACHINERY
04. OTHER FIXED ASSESTS
05. FIXED CAPITAL
06. RAW MATERIAL
07. SALARY AND WAGES
08. UTILITIES AND OVERHEADS
09. TOTAL WORKING CAPITAL
10. TOTAL CAPITAL INVESTMENT
11. COST OF PRODUCTION
12. TURN OVER/ANNUM
13. BREAK EVEN POINT
14. RESOURCES FOR FINANCE
15. INSTALMENT PAYABLE IN 5 YEARS
16. DEPRECIATION CHART FOR 5 YEARS
17. PROFIT ANALYSIS FOR 5 YEARS
18. PROJECTED BALANCE SHEET FOR (5 YEARS)
How to Make Project Report?
Detailed Project Report (DPR) includes Present Market Position and Expected Future Demand, Technology, Manufacturing Process, Investment Opportunity, Plant Economics and Project Financials. comprehensive analysis from industry covering detailed reporting and evaluates the position of the industry by providing insights to the SWOT analysis of the industry.
Each report include Plant Capacity, requirement of Land & Building, Plant & Machinery, Flow Sheet Diagram, Raw Materials detail with suppliers list, Total Capital Investment along with detailed calculation on Rate of Return, Break-Even Analysis and Profitability Analysis. The report also provides a birds eye view of the global industry with details on projected market size and then progresses to evaluate the industry in detail.
We can prepare detailed project report on any industry as per your requirement.
We can also modify the project capacity and project cost as per your requirement. If you are planning to start a business, contact us today.
Detailed Project Report (DPR) gives you access to decisive data such as:
- Market growth drivers
- Factors limiting market growth
- Current market trends
- Market structure
- Key highlights
Overview of key market forces propelling and restraining market growth:
- Up-to-date analyses of market trends and technological improvements
- Pin-point analyses of market competition dynamics to offer you a competitive edge major competitors
- An array of graphics, BEP analysis of major industry segments
- Detailed analyses of industry trends
- A well-defined technological growth with an impact-analysis
- A clear understanding of the competitive landscape and key product segments
Need Customized Project Report?
- Ask for FREE project related details with our consultant/industry expert.
- Share your specific research requirements for customized project report.
- Request for due diligence and consumer centric studies.
- Still haven't found what you're looking for? Speak to our Custom Research Team
About Engineers India Research Institute:
EIRI Board is a single destination for all the industry, company and country reports. We feature large repository of latest industry reports, leading and niche company profiles, and market statistics prepared by highly qualified consultants and verified by a panel of experts.
Note: We can also prepare project report on any subject based on your requirement and country. If you need, we can modify the project capacity and project cost based on your requirement.
Our reports provide an expansive market analysis of the sector by covering areas like growth drivers, trends prevailing in the industry as well as comprehensive SWOT analysis of the sector.
Our Clients
Our Approach
- Our research reports comprehensively cover Indian markets (can be modified as per your country), present investigation, standpoint and gauge for a time of five years*.
- The market conjectures are produced on the premise of optional research and are cross-accepted through associations with the business players
- We use dependable wellsprings of data and databases. What's more, data from such sources is handled by us and incorporated into the report
Why buy EIRI reports?
- Our project reports include detailed analysis that help to get industry Present Market Position and Expected Future Demand.
- Offer real analysis driving variables for the business and most recent business sector patterns in the business
- This report comprehends the present status of the business by clarifying a complete SWOT examination and investigation of the interest supply circumstance
- Report gives investigation and top to bottom money related correlation of real players/competitors
- The report gives gauges of key parameters which foresees the business execution
25 Dec
0
12 Aug
0
