Aluminium Industry and Aluminium Extrusion, Wire Drawing, Aluminum Ingot, Aluminum Products, Cans, Sheet, Extruded Products, Profiles, Doors, Powder, Foil, Cone, Slug, Tubes, Bars, Conductor, Alloys, Coils, Extruded Rods, Sheets
New
ALUMINIUM ALLOY PLANT (CAP: 100 MT/DAY)[EIRI/EDPR/1540] J.C.333INTRODUCTIONAluminum containing variable amounts of manganese, silicon, copper, Magnesium, lead bismuth, nickel, chromium, zinc ortin. A wide range of uses and properties is possible. Always may be obtained for costing or working h..
₹ 0 INR
New
ALUMINIUM EXTRUSION PLANT (10 TPD)[EIRI/EDPR/4745] J.C.: 2965XLExtrusion is a plastic deformation process in which a block of metal (billet) is forced to flow by compression through the die opening of a smaller cross-sectional area than that of the original billet Extrusion is an indirect-compressio..
₹ 0 INR
ALUMINIUM DOORS AND WINDOWS, UPVC DOORS AND WINDOWS, & STRUCTURAL GLAZING, ALUMINIUM COMPOSITE PANEL FABRICATION UNIT[EIRI/EDPR/3847] J.C.: 1956Windows and doors connect the interior of a house to the outdoors, provide ventilation and daylight, and are important aesthetic elements. Windows and d..
₹ 0 INR
FERRO TITANIUM PROCESSING PLANT [EIRI/EDPR/4701] J.C.: 2920US$INTRODUCTIONThe global steel production has increased continuously over the last few years and this trend is expected to continue in the years to come. The global crude steel output has been growing at about 5%and is expected to grow..
₹ 0 INR
ALUMINIUM COIL COATING FOR ACP AND ROOFING INDUSTRY (PRODUCTION CAP: 20 MT/DAY)[EIRI/EDPR/4693] J.C.: 2910XLAluminum is a silvery white crystalline solid tensile strength (Annealed)-6800 psi, cold rolled 16000 psi and form Protective coating of aluminum oxide approximately 50 and strong thick Which ..
₹ 0 INR
MS INGOT (TMT BAR, ANGLE CHANNEL, ROUND)[EIRI/EDPR/4688] J.C.: 2905XLMild steel Ingots are the basic raw material for the manufacture of various types of re-rolled products, for e.g. rounds, flats, channels equal and unequal angles etc. A major part of this re-rolled products in the form of cold-twi..
₹ 0 INR
ALUMINIUM INGOT FROM SCRAP (CAP: 15 TONS/DAY)[EIRI/EDPR/4662] J.C.: 2879XLINTRODUCTIONThe treatment of aluminum scrap to produce new aluminum metal and alloys is an alternative to primary Al production. The chemical composition of the alloys is strictly related to the scrap quality. Therefore, recyc..
₹ 0 INR
ALUMINIUM COMPOSITE PANEL (CAP: 4333.334 SQ.MT/DAY)[EIRI/EDPR/4487] J.C.: 2703XLINTRODUCTIONAluminium Composite Panels (ACP) are mainly light-weight composite material consisting of two pre-finished aluminium cover sheets heat-bonded (laminated) to a core made of polyethylene plastic material, avail..
₹ 0 INR
ALUMINIUM COIL COATING FOR ACP AND ROOFING INDUSTRY (CAP: 20 MT/DAY)[EIRI/EDPR/4483] J.C.: 2698XLAluminum is a silvery white crystalline solid tensile strength (Annealed)-6800 psi, cold rolled 16000 psi and form Protective coating of aluminum oxide approximately 50 and strong thick which make it hig..
₹ 0 INR
ALUMINIUM EXTRUSION (CAP: 12,000 MT/ANNUM)[EIRI/EDPR/4615] J.C.: 2832INR, 2832AEDExtrusion is a plastic deformation process in which a block of metal (billet) is forced to flow by compression through the die opening of a smaller cross-sectional area than that of the original billet Extrusion is an i..
₹ 0 INR
CELL CAST ACRYLIC SHEET (PRODUCTION RATE - 1600 SQ.FT. PER DAY)[EIRI/EDPR/4553] J.C.: 2770US$INTRODUCTIONCAST acrylic, as the name suggests, is manufactured by a process whereby MMA (Methyl Methacrylate monomer) liquid is pumped into a mould made from two sheets of glass. The mould/monomer is then s..
₹ 0 INR
ALUMINIUM EXTRUSION[CODE NO.4374] Aluminum is a very commonly specified material for use in extrusions and shape profiles because it possesses mechanical characteristics that make it ideally suited for the shaping and forming metal billet sections.The aluminum extrusion (also known by "al..
₹ 0 INR