Detailed Project Report on re-refining of used engine/lubricating oils

RE-REFINING OF USED ENGINE/LUBRICATIONG OILS
 [CODE NO.3387]


Now-a-days  engine  oil  has  become  an  important  factor   for automobile  and  other  purposes  and since  the  prices  of  all petroleum  products  have  gone  up.   It has become extremely necessary to refine used engine oil which could be reused as original. Keeping this view Defense Research (Materials), Kanpur has  developed  a very  simple  process  which  envisages utilization  of sulphuric acid, activated clay and filter aid  as the raw materials and the suggested reclaimed economical unit for this industry is 200 tons per annum, and estimated capital outlay is Rs.1.5 lacs.

Engine oil becomes contaminated with foreign material in service.  In circulating systems, where a substantial quantity of oil is involved, it is desirable to maintain it as clean as possible  to provide maximum working efficiency and to keep wear and damage of lubricated parts to a minimum.

Reconditioning of a used oil may be accomplished by a continuous by pass or batch  methods or combination  of  these.   In the continuous system the entire amount of the oil from main pressure line is continuously filtered.  In the bypass system a  fraction of the total is continuously filtered.  


COST ESTIMATION

Plant  Capacity                                             :     28.00 MT/day
land & Building (1834Sq.Mtr)                    :    Existing
Plant & Machinery                                        :    Rs. 1.50  Cr
Working Capital for 1 Month                      :    Rs. 3.99  Cr
Total Capital Investment                             :    Rs. 5.60  Cr
Rate of Return                                              :    37%
Break Even Point                                         :    44%


PRODUCT DESCRIPTION                                    

USES AND SCOPE                                        

PURIFICATION AND RECLAMATION OF OIL                        

PROPERTIES OF USED AND REGENERATED ENGINE OIL                

B. I. S. SPECIFICATION                                        

B. I. S. SPECIFICATION FOR AUTOMOTIVE INTERNAL    
COMBUSTION-ENGINE LUBRICATING OILS                        

METHOD OF TEST FOR STABLE POUR POINT (CLAUSE 5.1 AND TABLE 1)    

ADDITIVES FOR LUBRICANTS                                

CHARACTERISTICS OF LUBRICATING OILS                        

DESIRABLE CHARACTERSTICS IN LUBRICANTS                    

MARKET SURVEY                                            

OVERVIEW OF PETROLEUM OIL AND LUBRICANTS                    

INDIA LUBRICANT MARKET – SIZE, SHARE AND FORECAST (2017 – 2022)        

AREAS WITH SCOPE FOR THE LUBRICANT MARKET                                        

CHEMISTRY & COMPOSITION OF CRUDE PETROLEUM                

USED OIL AND ITS COMPOSITION                                

METHOD AND STEP INVOLVED IN RE-REFINING OF USED OIL            

MANUFACTURING PROCESS                                    

PROCESS FLOWSHEET FOR RECLAIMATION OF USED ENGINE OIL        

PROCESS DEVELOPED AT R.R.L. JORHAT                        

EXISTING PROCESSES FOR REGENERATION OF USED ENGINE
OILS PROCESSES                                        

THE NEW PROCESS HAS FIVE BASIS STEPS                        

RE-REFINING OF USED LUBRICATING OIL BY SOLVENT EXTRACTION
AND VACUUM DISTILLATION FOLLOWED BY HYDROTREATING            

RE-REFINING OF USED LUBE OILS BY SOLVENT/CLAYPERCOLATION PROCESSES                                       

PRODUCTION ECONOMICS                                    

PLANT LOCATION                                            

PROCESS FOR FUTURE EXPANSION & DIVERSIFICATION                

PLANT LAYOUT DIAGRAM                                    

STAFF & LABOUR REQUIREMENTS                                

ORGANISATION CHART                                        

LAY OUT OF THE PLANT  ACCORDING TO LAND AND
BUILDING CALCULATION                                    

SUPPLIERS OF RAW MATERIALS                                

COMPLETE PLANT SUPPLIERS                                   

SUPPLIERS OF PLANT & MACHINERIES                            

COMPLETE PLANT SUPPLIERS                                

MANUFACTURERS/SUPPLIERS OF PLANT AND MACHINERIES            


APPENDIX – A:

 1.      COST OF PLANT ECONOMICS      
 2.      LAND & BUILDING                                      
 3.      PLANT AND MACHINERY                                  
 4.      FIXED CAPITAL INVESTMENT                             
 5.      RAW MATERIAL                                         
 6.      SALARY AND WAGES                                     
 7.      UTILITIES AND OVERHEADS                              
 8.      TOTAL WORKING CAPITAL                                
 9.      COST OF PRODUCTION                                   
10.      PROFITABILITY ANALYSIS                               
11.      BREAK EVEN POINT                                     
12.      RESOURCES OF FINANCE                           
13.      INTEREST CHART                                       
14.      DEPRECIATION CHART                                   
15.      CASH FLOW STATEMENT                                   
16.      PROJECTED BALANCE SHEET