Detailed Project Report on Stainless Steel Sinks

STAINLESS STEEL SINKS

[EIRI/EDPR/1546]  (J.C.: 340)

INTRODUCTION

Stainless Steel Kitchen Sinks as the name suggests are made of stainless steel.  Sinks are the vessels used in houses and hotels, restaurants for cleaning  dirty  utensils, used for cooking, serving  tea and coffee etc. and eating  meals,  break fasts, refreshments need to be anti-rust and strong, and hence and made of  stainless steel. The sinks are used where the utensils carry lot of fat and other stick substances on the surfaces and require full dealing with detergents. There are more than 70 standard types of stainless steel. Generally, all are iron based, with 12 to 30% chromium and 0 to 22% nickel. Austenite stainless steel are most corrosion resistant. They contain 16 to 26% chromium and 6 to 22% nickel. The more famous 18:8 stainless steel contained 18% chromium and 8% nickel. These steels are tough and ductile. They are to be fabricated by all standard methods.

Stainless steel sinks can either be of cylindrical shape or rectangular shaps.  Generally sinks are made up in rectangular shape. Its one side is open on which the pipe line coming from the hot/cold water reservoir or steam - generating vessel is incorporated into the sink to provide water/steam at pressure for cleaning utensils.

The stainless steel sinks are placed mostly in the pantry or kitchen  of  the  house where dirty utensils  are  collexted  for washing  in  the  sink and water can be disposed  off  through  a permanent  drainage.  Stainless steel sinks are primary used  for condensing  corrosive vapors which  strike on its walls  and  are stored  and covered into the liquid phase.  The  stainless  steel sinks   to  be  fabricated  according  to  this  report  are   of rectangular  shape with one end open.  They are easy  to  install and deep enough to prevent splashing dirty water out of the  sink that might spoil the clothes of the person washing utensils.

COST ESTIMATION

Plant Capacity            200 Nos/Day

Land & Building (450 sq.mt.)    Rs. 74.00 Lac

Plant & Machinery                    Rs. 52.00 Lac

Working Capital for 2 Months    Rs. 2.08 Cr

Total Capital Investment          Rs. 3.54 Cr

Rate of Return                          38%

Break Even Point                      51%

CONTENTS

INTRODUCTION

USES AND APPLICATIONS

B.I.S. SPECIFICATIONS

MATERIAL PROPERTIES

MARKET POSITION

IMPORT DATA OF SINK MAT FROM CHINA TO CHENNAI SEA:

MANUFACTURES/ EXPORTS/ SUPPLIERS OF STAINLESS STEEL SINKS

DESIGNS & CONSTRUCTION OF SINKS AND ITS COMPONENTS

C.I. BRACKETS & SUPPORTS FOR WASH BASINS AND SINKS

COPPER ALLOY (BRASS) WASTE-FITTINGS FOR WASH BASIN & SINKS

MANUFACTURING PROCESS

PROCESS FLOWSHEET FOR MANUFACTURE OF S.S. SINKS

PLANT LAYOUT

PROJECT IMPLEMENTATION SCHEDULES

TURNKEY PLANT SUPPLIERS

PLANT AND MACHINERY SUPPLIERS

SUPPLIERS OF RAW MATERIALS

RAW MATERIALS

APPENDIX – A:

01. PLANT ECONOMICS

02. LAND & BUILDING

03. PLANT AND MACHINERY

04. OTHER FIXED ASSESTS

05. FIXED CAPITAL

06. RAW MATERIAL

07. SALARY AND WAGES

08. UTILITIES AND OVERHEADS

09. TOTAL WORKING CAPITAL

10. TOTAL CAPITAL INVESTMENT

11. COST OF PRODUCTION

12. TURN OVER/ANNUM

13. BREAK EVEN POINT

14. RESOURCES FOR FINANCE

15. INSTALMENT PAYABLE IN 5 YEARS

16. DEPRECIATION CHART FOR 5 YEARS

17. PROFIT ANALYSIS FOR 5 YEARS

18. PROJECTED BALANCE SHEET FOR (5 YEARS)