metallizesd cpp film 33.334 mt/day

METALLIZESD CPP FILM 33.334 MT/Day

[CODE NO.4450] 

The term CPP is used in the plastics industry to describe polypropylene-based films produced by a cast extrusion process (Cast Polypropylene). Although there are some CPP films used for hygiene applications and synthetic paper (usually involving fillers and other additives), the term CPP is usually used to refer to high clarity films targeting lamination, metallization and packaging applications. The rapid quench achieved with chill rolls results in excellent film clarity and gloss.

These types of films differ from BOPP (Biaxially-Oriented Polypropylene) because they are not oriented. Orientation is a process that increases the tensile strength of film in a specific direction by stretching or rolling. Strictly speaking, CPP films experience a small amount of orientation, but only in the Machine Direction (MD), due to the nature of the process.

Metallised films (or metallized films) are polymer films coated with a thin layer of metal, usually aluminium. They offer the glossy metallic appearance of an aluminium foil at a reduced weight and cost. Metallised films are widely used for decorative purposes and food packaging, and also for specialty applications including insulation and electronics.

COST ESTIMATION

Plant Capacity                            33.334 MT/Day  

Land & Building (4000 sq.mt.)    Rs.  5.91 Cr    

Plant & Machinery                            Rs. 26.30 Cr 

Working Capital for 1 Month    Rs. 10.70 Cr 

Total Capital Investment                  Rs. 43.92 Cr 

Rate of Return                                  28%

Break Even Point                              53%

INTRODUCTION

• METALLIZED CPP FILM
• PROPERTIES OF CAST POLYPROPYLENE FILM
• CPP FILMS AND USE THE FUNCTION
• CPP FILM FOR BREAD PACKAGING
• RAW MATERIALS
• CHARTERISTICS OF CPP FILM
• TECHNICAL DATA SHEET OF METALLIZED CPP FILM
• COMPARISON OF BOPP AND CPP FILM
• BOPP FILM
• CPP FILM
• MARKET OVERVIEW OF CAST POLY PROPYLENE FILM
• OPPORTUNITIES
• GROWTH AND EXPANSION OF END USER VERTICALS
• RESTRAINTS /CHALLENGES GLOBAL CAST POLYPROPYLENE (CPP) PACKAGING FILMS MARKET
• HIGH COSTS
• INCREASED NUMBER OF REGULATIONS
• SUPPLY CHAIN DISRUPTIONS
• COVID-19 IMPACT ON CAST POLYPROPYLENE (CPP) PACKAGING FILMS MARKET
• GLOBAL CAST POLYPROPYLENE (CPP) PACKAGING FILMS MARKET SCOPE
• TYPE
• APPLICATION
• THICKNESS
• END-USE
• SOME OF THE MAJOR PLAYERS OPERATING IN THE CAST POLYPROPYLENE (CPP) PACKAGING FILMS 
• MARKET ARE:
  
• SEGMENT WISE MARKET OF CPP FILM IN INDIA
• COMPARISON OF CPP FILM WITH OTHER’S PLASTIC FILM
• GENERAL COMPARISON
• TYPICAL PROPERTIES (1.0 MIL FILM)
• PROCESS OF METALLIZES CPP FILM
• METALLIZED PROCESS
• PROCESS FLOW DIAGRAM OF METALLIZED CPP FILM
• PRINCIPLES OF PLANT LAYOUT
• STORAGE LAYOUT:
• EQUIPMENT LAYOUT:
• SAFETY:
• PLANT EXPANSION:
• FLOOR SPACE:
• UTILITIES SERVICING:
• BUILDING:
• MATERIAL-HANDLING EQUIPMENT:
• RAILROADS AND ROADS:
• MAJOR PROVISIONS IN ROAD PLANNING FOR MULTIPURPOSE SERVICE ARE:
• PLANT LOCATION FACTORS
• PRIMARY FACTORS
• 1. RAW-MATERIAL SUPPLY:
• 2. MARKETS:
• 3. POWER AND FUEL SUPPLY:
• 4. WATER SUPPLY:
• 5. CLIMATE:
• SPECIFIC FACTORS
• 6. TRANSPORTATION:
• A. AVAILABILITY OF VARIOUS SERVICES AND PROJECTED RATES
• 7. WASTE DISPOSAL:
• 8. LABOR:
• 9. REGULATORY LAWS:
• 10. TAXES:
• 11. SITE CHARACTERISTICS:
• 12. COMMUNITY FACTORS:
• 13. VULNERABILITY TO WARTIME ATTACK:
• 14. FLOOD AND FIRE CONTROL:
• EXPLANATION OF TERMS USED IN THE PROJECT REPORT
• 1. DEPRECIATION:
• 2. FIXED ASSETS:
• 3. WORKING CAPITAL:
• 4. BREAK-EVEN POINT:
• 5. OTHER FIXED EXPENSES:
• 6. MARGIN MONEY:
• 7. TOTAL LOAD:
• 8. LAND AREA/MAN POWER RATIO:
• PROJECT IMPLEMENTATION SCHEDULES
• INTRODUCTION
• PROJECT HANDLING
• PROJECT SCHEDULING
• PROJECT CONSTRUCTION SCHEDULE
• TIME SCHEDULE
• ADDRESSES OF RAW MATERIAL SUPPLIERS
• ADDRESSES OF PLANT AND MACHINERY

APPENDIX – A:

01. PLANT ECONOMICS

02. LAND & BUILDING

03. PLANT AND MACHINERY

04. OTHER FIXED ASSESTS

05. FIXED CAPITAL

06. RAW MATERIAL

07. SALARY AND WAGES

08. UTILITIES AND OVERHEADS

09. TOTAL WORKING CAPITAL

10. TOTAL CAPITAL INVESTMENT

11. COST OF PRODUCTION

12. TURN OVER/ANNUM

13. BREAK EVEN POINT

14. RESOURCES FOR FINANCE

15. INSTALMENT PAYABLE IN 5 YEARS

16. DEPRECIATION CHART FOR 5 YEARS

17. PROFIT ANALYSIS FOR 5 YEARS

18. PROJECTED BALANCE SHEET FOR (5 YEARS)