I.V. Solution/Fluid (FFS Technology and Catheter) 2045000 Numbers per Day
- More than 40 years of experience
- Managed by expert industrial consultants
- ISO 9001-2015 Certified
- Registered under MSME, UAM No: DL01E0012000
- 24/5 Research Support
Get your quesries resolved from an industry expert. Ask your queries before report or book purchase. - Custom Research Service
Speak to the our consultant to design an exclusive study to serve your research needs. - Quality Assurance
All reports are prepared by highly qualified consultants & verified by a panel of experts. - Information Security
Your personal & confidential information is safe & secure.
I.V. SOLUTION/FLUID (FFS TECHNOLOGY AND CATHETER)
[EIRI/EDPR/4605] J.C.: 2822XL
INTRODUCTION
Intravenous fluids, in general are used as I.V drips for patients in nursing homes and hospitals suffering from acute dehydration or considerable debilitating conditions. These I.V fluids replanish the body fluids. Though a number of I.V fluids are there, generally three types of I.V fluids are used in hospitals as I.V drips. They are as follows:-
1. Dextrose injection fluid
2. Dextrose and sodium chloride injection fluid
Types of IV Fluid
Crystalloid: Balanced salt/electrolyte solution; for msa true solution and is capable of passing through semi permeable membranes. May be isotonic, hypertonic or hypotonic. Normal Saline (0.9% NaCl), Lactated Ringer’s, Hypertonic saline (3, 5, & 7.5%), Ringer’s solution. However, hypertonic solutions are considered plasma expanders as they act to increase the circulatory volume via movement of intracellular and interstitial water into the intravascular space.
Colloid: High-molecular-weight solutions, draw fluid into intravascular compartment via on cotic pressure (pressure exerted by plasma proteins not capable of passing through membranes on capillary walls).Plasma expanders, as they are composed of macromolecules, and are retained in the intravascular space.
Free H2O solutions: provide water that is not bound by macromolecules or organelles, free to passthrough.D5W (5% dextrose in water), D10W, D20W, D50W, and Dextrose/crystalloid mixes. Blood products: whole blood, packed RBCs, FFP, Cryoprecipitate, platelets, albumin. Essentially all colloids.
IVF can supply 3 things: fluid, electrolytes & calories. In the non stressed, fasting state, the 150g per day inD5W at 125ml/h can provide enough carbohydrate to limit proteolysis. The most common uses for IVF: Acutely expand intravascular volume in hypovolemic states correct electrolyte imbalances Maintain basal hydration.
COST ESTIMATION
Plant Capacity 20,45,000 Nos/Day
Land & Building (24,000 sq.mt.) Rs. 52.70 Cr
Plant & Machinery Rs. 57.05 Cr
Working Capital for 1 Month Rs. 43.91 Cr
Total Capital Investment Rs. 155.72 Cr
Rate of Return 46%
Break Even Point 37%
CONTENTS
INTRODUCTION
TYPES OF IV FLUID
COMMONLY USED IV FLUIDS
HOW INTRAVENOUS FLUIDS ARE CREATED
IV FLUID/ELECTROLYTE THERAPY
KEY TERMS
DEXTROSE
DEXTROSE SALINE INJECTION
PROPERTIES
TABLE I: PHYSICAL PROPERTIES OF D-GLUCOSE
TABLE 2: SOLUBILITY OF DEXTROSE IN WATER
REQUIREMENTS OF RAW MATERIALS FOR IV FLUID
TABLE I: REQUIREMENT FOR DEXTROSE MONOHYDRATE
INTRAVENOUS FLUID COMPOSITION
CRYSTALLOIDS
DEXTROSE
NORMAL SALINE
HARTMANN’S SOLUTION
COLLOIDS
CATHETER LENGTH, SIZE AND TYPE
CATHETER LENGTH
BALLOON SIZE
TYPES
DIAMETERS:
STRAIGHT-SINGLE USE CATHETERS
2-WAY FOLEY CATHETERS (RETENTION CATHETERS)
CURVED OR COUDE
3-WAY FOLEY CATHETER
BRIEF DESCRIPTION OF CATHETER
DIALYSIS CATHETER
THE LINE CAN BE USED FOR:
PERIPHERALLY INSERTED CENTRAL CATHETER (PICC)
TUNNELED CATHETERS
UROLOGY CATHETER
CENTRAL VENOUS CATHETER
RAW MATERIALS FOR CATHETER
DESIGN
SILICONES
POLYVINYL CHLORIDE
CHEMICAL COMPOSITION OF LATEX
USES, ADVANTAGES & DISADVANTAGES
ADVANTAGES OF CVC FOR DIALYSIS:
SHORT TERM OPEN ENDED CATHETER
PERIPHERALLY INSERTED CENTRAL CATHETER
TUNNELED CATHETERS
IMPLANTABLE VENOUS ACCESS DEVICES
CENTRAL VENOUS CATHETER
TYPES OF CENTRAL VENOUS CATHETERS
THE TYPE OF CVC INSERTED DEPENDS ON THE:
CENTER VENOUS CATHETERS: OPEN-ENDED OR CLOSED-ENDED
OPEN–ENDED
CLOSED-ENDED
SHORT-TERM CATHETERS
IMPLANTABLE VENOUS ACCESS DEVICE (IVAD)
LSR (LIQUID SILICONE RUBBER)
PROCESS OF LIQUID SILICONE FOLEY CATHETER
TECHNOLOGY OF CATHETER
PROCESSING COATED CATHETERS
PROCESSING STEP OF FOLEY CATHETER
PHOTOGRAPHS
MELT PUMPS
MELT PUMPS WITH MULTI-LAYER DIE
OPEN CALIBRATION TANK
BALLOON FORMING MACHINE
DUAL FLUTING AND WRAPPING MACHINE
TWO-LAYER HIGH-PRECISION STRAND LINE
WINDER, HAUL-OFF WITH DIAMETER CONTROL & VACUUM CALIBRATION
DIE & CARRIAGE, PREHEATING SYSTEM & UNWINDER FOR SUPPORTING WIRE
CONTROL SYSTEM
CATHETER DESIGN AND MATERIALS
MATERIAL DIFFERENCES
CATHETER DESIGN
TIP DESIGN
CATHETER OVER NEEDLE DEVICES
CATHETER THROUGH NEEDLE/CANNULA
NEEDLE DESIGN
CATHETER SIZE
MULTILUMEN CATHETERS
HUB OPTIMIZATION & INTEGRATION OF HIGH-PERFORMANCE CATHETERS
TUBING ASSEMBLY
HUB-CATHETER
STANDARD HUB SPECIFICATIONS
BOND STRENGTH
HUB DESIGN AND MANUFACTURING OPTIMIZATION
LIQUID SILICONE FOLEY CATHETER MANUFACTURING EQUIPMENTS AND CATHETER MOULD
VERTICAL LIQUID SILICONE RUBBER (LSR) INJECTION MOLDING MACHINE
ABOUT MACHINE
OTHER MACHINE STYLE:
THE MAIN FEATURE OF THE VERTICAL LSR MOLDING MACHINE:
SOURCE OF MACHINES TECHNOLOGY FOR IV FLUID
USES AND APPLICATION
SOME GENERAL INTRAVENOUS FLUIDS
SPECIFICATION OF INDIAN PHARMACOPEIA ON I.V FLUIDS DEXTRAN 40 INJECTION
DEXTRAN 110 INJECTIONS
B.I.S. SPECIFICATIONS FOR PLASTIC I.V. BOTTLES
SODIUM CHLORIDE AND DEXTROSE INJECTION
ASSAY:
BASIC RAW MATERIALS FOR IV FLUID
REQUIREMENTS OF RAW MATERIALS AND SPECIFICATIONS FOR IV FLUID
WATER FOR INJECTION
HDPE PHARMA GRADE LAMINATE/ PLASTIC ROLL
LABELING
IDENTIFICATION
HEAVY METALS
MARKET OVERVIEW OF FOLEY CATHETER
MARKET OVERVIEW OF IV SOLUTION
COMMON REASON FOR USING CATHETER
DESIGN AND PROCESS DETAILS OF CATHETER
A FOLEY CATHETER
QUALITY CONTROL
SEQUENCES IN CATHETER MANUFACTURE
COMPOSITION OF IV FLUID
COMPOSITION OF COMMON IV FLUID (MEQ/L)
COMPOSITION OF IV FLUIDS
COMPOSITION OF COMMERCIAL I.V. FLUID AVAILABLE
LARGE VOLUME PARENTERAL PREPARATION
SOME EXAMPLES OF LVPS INCLUDE SOLUTIONS CONTAINING:
ELECTROLYTE SOLUTIONS
MILLIEQUIVALENT (MEQ)
IN PLASMA;
NOURISHING SOLUTIONS
PLASMA EXPANDERS
HUMAN SERUM ALBUMIN:
PLASMA PROTEIN FRACTION:
PRODUCTION PROCEDURE FOR PARENTERAL DRUGS
PRODUCTION FACILITIES AND CONTROLS:
1. CLEAN-UP AREA:
2. PREPARATION AREA:
3. ASEPTIC AREA:
4. QUARANTINE AREA:
5. FINISHING & PACKAGING AREA:
CONTROLLED ENVIRONMENT REQUIRED FOR PARENTERAL PREPARATION:
CLASSIFICATION OF CLEAN ROOMS:-
ASEPTIC PROCESSING:-
MANUFACTURING PROCESS OF I.V. FLUID (FFS TECHNOLOGY)
A TYPICAL FFS PROCESS WORKS AS FOLLOWS:
PROCESS FLOW DIAGRAM
PROCESS IN DETAILS FOR IV FLUID
1. DISTILLED WATER PREPARATION
2. SOLUTION PREPARATION
3. INJECTION BLOW MOULDING
4. MOULDING PROCESS
5. FILLING PROCESS
6. SEALING PROCESS
7. MOULD OPENING PROCESS
FILTRATION AND FILLING:-
STERILIZATION:-
QUALITY CONTROL:-
THE WHOLE PROCESS CONSISTS OF THE FOLLOWING STEPS:-
SWOT ANALYSIS
FORM FILL SEAL TECHNOLOGY
1. FORM-FILL-SEAL TECHNOLOGY:-
1.5 FILTRATION (MEMBRANE):-
SUPPLIERS OF RAW MATERIALS
SUPPLIERS OF POTASSIUM PERMANGANATE
SUPPLIERS OF SODIUM CHLORIDE (I.P. GRADE)
SUPPLIERS OF DEXTROSE
SUPPLIERS OF PLANT AND MACHINERY FOR IV FLUIDS
SUPPLIERS OF STERILIZING EQUIPMENTS
SUPPLIERS OF PM METER
SUPPLIERS OF LABELING MACHINES
SUPPLIERS OF TANKS
SUPPLIERS OF BOILER
SUPPLIERS OF FILTER PRESS
SUPPLIERS OF LABORATORY EQUIPMENTS
SUPPLIERS OF MIXER
SUPPLIERS OF COMPLETE PLANT AND MACHINERY FOR IV FLUID [IMPORTED]
CONSULTANT OF TURNKEY PROJECT SUPPLIER FORIV FLUIDS
CLEAN ROOM SUPPLIERS
ADDRESSES OF MACHINERIES SUPPLIERS FOR CATHETER
SUPPLIERS OF OPEN CALIBRATION TANK
SUPPLIERS OF TWO-LAYER HIGH-PRECISION STRAND LINE
SUPPLIERS OF WINDER
SUPPLIERS OF HAUL-OFF WITH DIAMETER CONTROL
SUPPLIERS OF VACUUM CALIBRATION
LIST OF EQUIPMENTS (MACHINERIES) FOR CATHETER THROUGH EXTRUSION PROCESS
MAIN COMPONENTS OF A CATHETER EXTRUSION LINE
EXTRUDER
MELT PUMPS
GRAVIMETRIC FEEDING
DIES
VACUUM CALIBRATION AND COOLING
DIAMETER CONTROL
WINDERS
CUTTING UNITS
UNWINDER FOR SUPPORTING WIRE
PREHEATING SYSTEMS
PROCESS CONTROL WITH PROTOCOL LING
CLEAN-ROOM CONDITIONS
TWO-LAYER HIGH-PRECISION STRAND LINE
CONTROL SYSTEM
APPENDIX – A:
01. PLANT ECONOMICS
02. LAND & BUILDING
03. PLANT AND MACHINERY
04. OTHER FIXED ASSESTS
05. FIXED CAPITAL
06. RAW MATERIAL
07. SALARY AND WAGES
08. UTILITIES AND OVERHEADS
09. TOTAL WORKING CAPITAL
10. TOTAL CAPITAL INVESTMENT
11. COST OF PRODUCTION
12. TURN OVER/ANNUM
13. BREAK EVEN POINT
14. RESOURCES FOR FINANCE
15. INSTALMENT PAYABLE IN 5 YEARS
16. DEPRECIATION CHART FOR 5 YEARS
17. PROFIT ANALYSIS FOR 5 YEARS
18. PROJECTED BALANCE SHEET FOR (5 YEARS)
How to Make Project Report?
Detailed Project Report (DPR) includes Present Market Position and Expected Future Demand, Technology, Manufacturing Process, Investment Opportunity, Plant Economics and Project Financials. comprehensive analysis from industry covering detailed reporting and evaluates the position of the industry by providing insights to the SWOT analysis of the industry.
Each report include Plant Capacity, requirement of Land & Building, Plant & Machinery, Flow Sheet Diagram, Raw Materials detail with suppliers list, Total Capital Investment along with detailed calculation on Rate of Return, Break-Even Analysis and Profitability Analysis. The report also provides a birds eye view of the global industry with details on projected market size and then progresses to evaluate the industry in detail.
We can prepare detailed project report on any industry as per your requirement.
We can also modify the project capacity and project cost as per your requirement. If you are planning to start a business, contact us today.
Detailed Project Report (DPR) gives you access to decisive data such as:
- Market growth drivers
- Factors limiting market growth
- Current market trends
- Market structure
- Key highlights
Overview of key market forces propelling and restraining market growth:
- Up-to-date analyses of market trends and technological improvements
- Pin-point analyses of market competition dynamics to offer you a competitive edge major competitors
- An array of graphics, BEP analysis of major industry segments
- Detailed analyses of industry trends
- A well-defined technological growth with an impact-analysis
- A clear understanding of the competitive landscape and key product segments
Need Customized Project Report?
- Ask for FREE project related details with our consultant/industry expert.
- Share your specific research requirements for customized project report.
- Request for due diligence and consumer centric studies.
- Still haven't found what you're looking for? Speak to our Custom Research Team
About Engineers India Research Institute:
Our Approach
- Our research reports comprehensively cover Indian markets (can be modified as per your country), present investigation, standpoint and gauge for a time of five years*.
- The market conjectures are produced on the premise of optional research and are cross-accepted through associations with the business players
- We use dependable wellsprings of data and databases. What's more, data from such sources is handled by us and incorporated into the report
Why buy EIRI reports?
- Our project reports include detailed analysis that help to get industry Present Market Position and Expected Future Demand.
- Offer real analysis driving variables for the business and most recent business sector patterns in the business
- This report comprehends the present status of the business by clarifying a complete SWOT examination and investigation of the interest supply circumstance
- Report gives investigation and top to bottom money related correlation of real players/competitors
- The report gives gauges of key parameters which foresees the business execution
